인스타그램 스토리 뷰어

PSL alumnus Dr. Teng Teng @ttistengteng was elected to the Board of Directors of ACADIA @acadiaorg , the Association for Computer Aided Design in Architecture, during ACADIA 2025.

In addition to serving on ACADIA’s Board and Scientific Committee, Dr. Teng will support the organization of ACADIA 2026 as Technical Chair. The conference will be hosted by Lawrence Technological University in the Detroit metropolitan region.

Congratulations to Dr. Teng on this new role and his continued contribution to the design computation community.

#architecture #computationaldesign #ltu

ARCH 7040 Systems of Additive Assembly Research Studio Final Models

Instructor: Masoud Akbarzadeh @masoudakbarzadeh

Teaching Assistant: Yefan Zhi @yefan_zhi

P1-3: Xiyan Li, Keke Liu
P4-6: Hunter Gutt, Colby Cox
P7-9: Gyo Hwang

#architecture #prefabconcrete #weitzmanschool #weitzmanarch

ARCH 7040 Systems of Additive Assembly Research Studio Final Models

Instructor: Masoud Akbarzadeh @masoudakbarzadeh

Teaching Assistant: Yefan Zhi @yefan_zhi

P1-3: Xiyan Li, Keke Liu
P4-6: Hunter Gutt, Colby Cox
P7-9: Gyo Hwang

#architecture #prefabconcrete #weitzmanschool #weitzmanarch

ARCH 7040 Systems of Additive Assembly Research Studio Final Models

Instructor: Masoud Akbarzadeh @masoudakbarzadeh

Teaching Assistant: Yefan Zhi @yefan_zhi

P1-3: Xiyan Li, Keke Liu
P4-6: Hunter Gutt, Colby Cox
P7-9: Gyo Hwang

#architecture #prefabconcrete #weitzmanschool #weitzmanarch

ARCH 7040 Systems of Additive Assembly Research Studio Final Models

Instructor: Masoud Akbarzadeh @masoudakbarzadeh

Teaching Assistant: Yefan Zhi @yefan_zhi

P1-3: Xiyan Li, Keke Liu
P4-6: Hunter Gutt, Colby Cox
P7-9: Gyo Hwang

#architecture #prefabconcrete #weitzmanschool #weitzmanarch

ARCH 7040 Systems of Additive Assembly Research Studio Final Models

Instructor: Masoud Akbarzadeh @masoudakbarzadeh

Teaching Assistant: Yefan Zhi @yefan_zhi

P1-3: Xiyan Li, Keke Liu
P4-6: Hunter Gutt, Colby Cox
P7-9: Gyo Hwang

#architecture #prefabconcrete #weitzmanschool #weitzmanarch

ARCH 7040 Systems of Additive Assembly Research Studio Final Models

Instructor: Masoud Akbarzadeh @masoudakbarzadeh

Teaching Assistant: Yefan Zhi @yefan_zhi

P1-3: Xiyan Li, Keke Liu
P4-6: Hunter Gutt, Colby Cox
P7-9: Gyo Hwang

#architecture #prefabconcrete #weitzmanschool #weitzmanarch

ARCH 7040 Systems of Additive Assembly Research Studio Final Models

Instructor: Masoud Akbarzadeh @masoudakbarzadeh

Teaching Assistant: Yefan Zhi @yefan_zhi

P1-3: Xiyan Li, Keke Liu
P4-6: Hunter Gutt, Colby Cox
P7-9: Gyo Hwang

#architecture #prefabconcrete #weitzmanschool #weitzmanarch

ARCH 7040 Systems of Additive Assembly Research Studio Final Models

Instructor: Masoud Akbarzadeh @masoudakbarzadeh

Teaching Assistant: Yefan Zhi @yefan_zhi

P1-3: Xiyan Li, Keke Liu
P4-6: Hunter Gutt, Colby Cox
P7-9: Gyo Hwang

#architecture #prefabconcrete #weitzmanschool #weitzmanarch

ARCH 7040 Systems of Additive Assembly Research Studio Final Models

Instructor: Masoud Akbarzadeh @masoudakbarzadeh

Teaching Assistant: Yefan Zhi @yefan_zhi

P1-3: Xiyan Li, Keke Liu
P4-6: Hunter Gutt, Colby Cox
P7-9: Gyo Hwang

#architecture #prefabconcrete #weitzmanschool #weitzmanarch

ARCH 7040 Systems of Additive Assembly Research Studio Final Models

Instructor: Masoud Akbarzadeh @masoudakbarzadeh

Teaching Assistant: Yefan Zhi @yefan_zhi

P1-3: Yilun Jin, Jiapeng Sun
P4-6: Tom Yang, Mu Cao

#architecture #prefabconcrete #weitzmanschool #weitzmanarch

ARCH 7040 Systems of Additive Assembly Research Studio Final Models

Instructor: Masoud Akbarzadeh @masoudakbarzadeh

Teaching Assistant: Yefan Zhi @yefan_zhi

P1-3: Yilun Jin, Jiapeng Sun
P4-6: Tom Yang, Mu Cao

#architecture #prefabconcrete #weitzmanschool #weitzmanarch

ARCH 7040 Systems of Additive Assembly Research Studio Final Models

Instructor: Masoud Akbarzadeh @masoudakbarzadeh

Teaching Assistant: Yefan Zhi @yefan_zhi

P1-3: Yilun Jin, Jiapeng Sun
P4-6: Tom Yang, Mu Cao

#architecture #prefabconcrete #weitzmanschool #weitzmanarch

ARCH 7040 Systems of Additive Assembly Research Studio Final Models

Instructor: Masoud Akbarzadeh @masoudakbarzadeh

Teaching Assistant: Yefan Zhi @yefan_zhi

P1-3: Yilun Jin, Jiapeng Sun
P4-6: Tom Yang, Mu Cao

#architecture #prefabconcrete #weitzmanschool #weitzmanarch

ARCH 7040 Systems of Additive Assembly Research Studio Final Models

Instructor: Masoud Akbarzadeh @masoudakbarzadeh

Teaching Assistant: Yefan Zhi @yefan_zhi

P1-3: Yilun Jin, Jiapeng Sun
P4-6: Tom Yang, Mu Cao

#architecture #prefabconcrete #weitzmanschool #weitzmanarch

ARCH 7040 Systems of Additive Assembly Research Studio Final Models

Instructor: Masoud Akbarzadeh @masoudakbarzadeh

Teaching Assistant: Yefan Zhi @yefan_zhi

P1-3: Yilun Jin, Jiapeng Sun
P4-6: Tom Yang, Mu Cao

#architecture #prefabconcrete #weitzmanschool #weitzmanarch

Glass Bridge has been selected as one of the five finalists in the Details - Architecture +Glass category of this year's Architizer A+Awards. If you like our project, please cast a vote for us at https://awards.architizer.com/a/

#glass #architecture #glassbridge

Final review of ARCH 7040 Prefab, 3D Printed Mid Rise next Tuesday

#architecture #weitzmanarch #3dprinting #concreteprinting

ARCH 7040 Prefab, 3D Printed Mid Rise Research Studio Midterm Models

Instructor: Masoud Akbarzadeh @masoudakbarzadeh
Teaching Assistant: Yefan Zhi @yefan_zhi

P1-4: Yilun Jin, Jiapeng Sun
P5-7: Gyo Hwang
P8-10: Xiyan Li, Koko Liu

Scaled fabrication models printed using concrete printing toolpaths.

#architecture #prefabconcrete #weitzmanschool #weitzmanarch

ARCH 7040 Prefab, 3D Printed Mid Rise Research Studio Midterm Models

Instructor: Masoud Akbarzadeh @masoudakbarzadeh
Teaching Assistant: Yefan Zhi @yefan_zhi

P1-4: Yilun Jin, Jiapeng Sun
P5-7: Gyo Hwang
P8-10: Xiyan Li, Koko Liu

Scaled fabrication models printed using concrete printing toolpaths.

#architecture #prefabconcrete #weitzmanschool #weitzmanarch

ARCH 7040 Prefab, 3D Printed Mid Rise Research Studio Midterm Models

Instructor: Masoud Akbarzadeh @masoudakbarzadeh
Teaching Assistant: Yefan Zhi @yefan_zhi

P1-4: Yilun Jin, Jiapeng Sun
P5-7: Gyo Hwang
P8-10: Xiyan Li, Koko Liu

Scaled fabrication models printed using concrete printing toolpaths.

#architecture #prefabconcrete #weitzmanschool #weitzmanarch

ARCH 7040 Prefab, 3D Printed Mid Rise Research Studio Midterm Models

Instructor: Masoud Akbarzadeh @masoudakbarzadeh
Teaching Assistant: Yefan Zhi @yefan_zhi

P1-4: Yilun Jin, Jiapeng Sun
P5-7: Gyo Hwang
P8-10: Xiyan Li, Koko Liu

Scaled fabrication models printed using concrete printing toolpaths.

#architecture #prefabconcrete #weitzmanschool #weitzmanarch

ARCH 7040 Prefab, 3D Printed Mid Rise Research Studio Midterm Models

Instructor: Masoud Akbarzadeh @masoudakbarzadeh
Teaching Assistant: Yefan Zhi @yefan_zhi

P1-4: Yilun Jin, Jiapeng Sun
P5-7: Gyo Hwang
P8-10: Xiyan Li, Koko Liu

Scaled fabrication models printed using concrete printing toolpaths.

#architecture #prefabconcrete #weitzmanschool #weitzmanarch

ARCH 7040 Prefab, 3D Printed Mid Rise Research Studio Midterm Models

Instructor: Masoud Akbarzadeh @masoudakbarzadeh
Teaching Assistant: Yefan Zhi @yefan_zhi

P1-4: Yilun Jin, Jiapeng Sun
P5-7: Gyo Hwang
P8-10: Xiyan Li, Koko Liu

Scaled fabrication models printed using concrete printing toolpaths.

#architecture #prefabconcrete #weitzmanschool #weitzmanarch

ARCH 7040 Prefab, 3D Printed Mid Rise Research Studio Midterm Models

Instructor: Masoud Akbarzadeh @masoudakbarzadeh
Teaching Assistant: Yefan Zhi @yefan_zhi

P1-4: Yilun Jin, Jiapeng Sun
P5-7: Gyo Hwang
P8-10: Xiyan Li, Koko Liu

Scaled fabrication models printed using concrete printing toolpaths.

#architecture #prefabconcrete #weitzmanschool #weitzmanarch

ARCH 7040 Prefab, 3D Printed Mid Rise Research Studio Midterm Models

Instructor: Masoud Akbarzadeh @masoudakbarzadeh
Teaching Assistant: Yefan Zhi @yefan_zhi

P1-4: Yilun Jin, Jiapeng Sun
P5-7: Gyo Hwang
P8-10: Xiyan Li, Koko Liu

Scaled fabrication models printed using concrete printing toolpaths.

#architecture #prefabconcrete #weitzmanschool #weitzmanarch

ARCH 7040 Prefab, 3D Printed Mid Rise Research Studio Midterm Models

Instructor: Masoud Akbarzadeh @masoudakbarzadeh
Teaching Assistant: Yefan Zhi @yefan_zhi

P1-4: Yilun Jin, Jiapeng Sun
P5-7: Gyo Hwang
P8-10: Xiyan Li, Koko Liu

Scaled fabrication models printed using concrete printing toolpaths.

#architecture #prefabconcrete #weitzmanschool #weitzmanarch

ARCH 7040 Prefab, 3D Printed Mid Rise Research Studio Midterm Models

Instructor: Masoud Akbarzadeh @masoudakbarzadeh
Teaching Assistant: Yefan Zhi @yefan_zhi

P1-4: Yilun Jin, Jiapeng Sun
P5-7: Gyo Hwang
P8-10: Xiyan Li, Koko Liu

Scaled fabrication models printed using concrete printing toolpaths.

#architecture #prefabconcrete #weitzmanschool #weitzmanarch

ARCH 7040 Prefab, 3D Printed Mid Rise Research Studio Midterm Models

Instructor: Masoud Akbarzadeh @masoudakbarzadeh
Teaching Assistant: Yefan Zhi @yefan_zhi

P1-4: Tom Yang, Mu Cao
P5-7: Colby Cox, Hunter Gutt

Scaled fabrication models printed using concrete printing toolpaths.

#architecture #prefabconcrete #weitzmanschool #weitzmanarch

ARCH 7040 Prefab, 3D Printed Mid Rise Research Studio Midterm Models

Instructor: Masoud Akbarzadeh @masoudakbarzadeh
Teaching Assistant: Yefan Zhi @yefan_zhi

P1-4: Tom Yang, Mu Cao
P5-7: Colby Cox, Hunter Gutt

Scaled fabrication models printed using concrete printing toolpaths.

#architecture #prefabconcrete #weitzmanschool #weitzmanarch

ARCH 7040 Prefab, 3D Printed Mid Rise Research Studio Midterm Models

Instructor: Masoud Akbarzadeh @masoudakbarzadeh
Teaching Assistant: Yefan Zhi @yefan_zhi

P1-4: Tom Yang, Mu Cao
P5-7: Colby Cox, Hunter Gutt

Scaled fabrication models printed using concrete printing toolpaths.

#architecture #prefabconcrete #weitzmanschool #weitzmanarch

ARCH 7040 Prefab, 3D Printed Mid Rise Research Studio Midterm Models

Instructor: Masoud Akbarzadeh @masoudakbarzadeh
Teaching Assistant: Yefan Zhi @yefan_zhi

P1-4: Tom Yang, Mu Cao
P5-7: Colby Cox, Hunter Gutt

Scaled fabrication models printed using concrete printing toolpaths.

#architecture #prefabconcrete #weitzmanschool #weitzmanarch

ARCH 7040 Prefab, 3D Printed Mid Rise Research Studio Midterm Models

Instructor: Masoud Akbarzadeh @masoudakbarzadeh
Teaching Assistant: Yefan Zhi @yefan_zhi

P1-4: Tom Yang, Mu Cao
P5-7: Colby Cox, Hunter Gutt

Scaled fabrication models printed using concrete printing toolpaths.

#architecture #prefabconcrete #weitzmanschool #weitzmanarch

ARCH 7040 Prefab, 3D Printed Mid Rise Research Studio Midterm Models

Instructor: Masoud Akbarzadeh @masoudakbarzadeh
Teaching Assistant: Yefan Zhi @yefan_zhi

P1-4: Tom Yang, Mu Cao
P5-7: Colby Cox, Hunter Gutt

Scaled fabrication models printed using concrete printing toolpaths.

#architecture #prefabconcrete #weitzmanschool #weitzmanarch

ARCH 7040 Prefab, 3D Printed Mid Rise Research Studio Midterm Models

Instructor: Masoud Akbarzadeh @masoudakbarzadeh
Teaching Assistant: Yefan Zhi @yefan_zhi

P1-4: Tom Yang, Mu Cao
P5-7: Colby Cox, Hunter Gutt

Scaled fabrication models printed using concrete printing toolpaths.

#architecture #prefabconcrete #weitzmanschool #weitzmanarch

Dr. Masoud Akbarzadeh will speak at Pint of Science Philadelphia 2026 on Monday May 18th. Pint of Science is a global nonprofit organization present in over 500 cities worldwide whose mission is to make science accessible to everyone, regardless of their background.

Pint of Science: https://pintofscience.us/

Dr. Masoud Akbarzadeh will speak at Pint of Science Philadelphia 2026 on Monday May 18th. Pint of Science is a global nonprofit organization present in over 500 cities worldwide whose mission is to make science accessible to everyone, regardless of their background.

Pint of Science: https://pintofscience.us/

Congratulations to our recently graduated PhD alum Dr. Teng Teng (@ttistengteng ) on joining Lawrence Technological University as a tenure-track Assistant Professor. Dr. Teng is a design researcher with great interest in integrating novel construction materials with advanced fabrication systems. We wish him all the best in his new role at LTU.
https://psl.design.upenn.edu/teng-teng/
https://ltu.edu/faculty/teng-teng/

@polyhedralstructurelab @weitzman_school @weitzman_arch @penn_weitzman_phd_architecture @lawrencetechuniversity @ltu_coad

#polyhedralstructurelab #weitzmanschool #upenn #phd #architecture

On Feb 24, Teng Teng @ttistengteng successfully defended his PhD Dissertation on Advanced Additive Manufacturing. Dr. Teng’s work is focused on advancing additive manufacturing across material, scale, and dimensions toward high-performance structure.

Primary Advisor: Prof. Masoud Akbarzadeh @masoudakbarzadeh

PhD committee members: Prof. Shu Yang @shu.yang.upenn (Materials Science and Engineering, University of Pennsylvania), Prof. Dorit Aviv @thermal_architecture_lab (Architecture, University of Pennsylvania), Prof. Arash Adel @arash_adel (Architecture, Princeton University).

We wish Dr. Teng all the best in his future endeavors!

@penn_weitzman_phd_architecture@weitzman_school @weitzman_arch

#upennarchitecture #additivemanufacturing #3dprinting #phd

I was fortunate to have the opportunity of teaching a workshop focusing on 3D printing and graphic statics at the University of Calgary's School of Architecture, Planning and Landscape (SAPL) this month. The 5-day workshop, part of SAPL’s Block Week, is titled Design and Optimization for Architectural 3D Concrete Printing. Students were exposed to the geometric structural form-finding method of polyhedral graphic statics and the concrete printing slicing and optimization framework. Through the Polyhedral Structures Laboratory-developed software PolyFrame 2 and Ovenbird, students were able to design innovative structures for cross-scale printing. Many thanks to my Teaching Assistant @mahdiyar.esmailbeigi , @ali_nv for the invitation, and @gegardner for the coordination.
Workshop results: https://psl.design.upenn.edu/taylor-workshop-at-the-university-of-calgary2026/

#concrete #concreteprinting #3dprinting #ucalgary

I was fortunate to have the opportunity of teaching a workshop focusing on 3D printing and graphic statics at the University of Calgary's School of Architecture, Planning and Landscape (SAPL) this month. The 5-day workshop, part of SAPL’s Block Week, is titled Design and Optimization for Architectural 3D Concrete Printing. Students were exposed to the geometric structural form-finding method of polyhedral graphic statics and the concrete printing slicing and optimization framework. Through the Polyhedral Structures Laboratory-developed software PolyFrame 2 and Ovenbird, students were able to design innovative structures for cross-scale printing. Many thanks to my Teaching Assistant @mahdiyar.esmailbeigi , @ali_nv for the invitation, and @gegardner for the coordination.
Workshop results: https://psl.design.upenn.edu/taylor-workshop-at-the-university-of-calgary2026/

#concrete #concreteprinting #3dprinting #ucalgary

I was fortunate to have the opportunity of teaching a workshop focusing on 3D printing and graphic statics at the University of Calgary's School of Architecture, Planning and Landscape (SAPL) this month. The 5-day workshop, part of SAPL’s Block Week, is titled Design and Optimization for Architectural 3D Concrete Printing. Students were exposed to the geometric structural form-finding method of polyhedral graphic statics and the concrete printing slicing and optimization framework. Through the Polyhedral Structures Laboratory-developed software PolyFrame 2 and Ovenbird, students were able to design innovative structures for cross-scale printing. Many thanks to my Teaching Assistant @mahdiyar.esmailbeigi , @ali_nv for the invitation, and @gegardner for the coordination.
Workshop results: https://psl.design.upenn.edu/taylor-workshop-at-the-university-of-calgary2026/

#concrete #concreteprinting #3dprinting #ucalgary

I was fortunate to have the opportunity of teaching a workshop focusing on 3D printing and graphic statics at the University of Calgary's School of Architecture, Planning and Landscape (SAPL) this month. The 5-day workshop, part of SAPL’s Block Week, is titled Design and Optimization for Architectural 3D Concrete Printing. Students were exposed to the geometric structural form-finding method of polyhedral graphic statics and the concrete printing slicing and optimization framework. Through the Polyhedral Structures Laboratory-developed software PolyFrame 2 and Ovenbird, students were able to design innovative structures for cross-scale printing. Many thanks to my Teaching Assistant @mahdiyar.esmailbeigi , @ali_nv for the invitation, and @gegardner for the coordination.
Workshop results: https://psl.design.upenn.edu/taylor-workshop-at-the-university-of-calgary2026/

#concrete #concreteprinting #3dprinting #ucalgary

I was fortunate to have the opportunity of teaching a workshop focusing on 3D printing and graphic statics at the University of Calgary's School of Architecture, Planning and Landscape (SAPL) this month. The 5-day workshop, part of SAPL’s Block Week, is titled Design and Optimization for Architectural 3D Concrete Printing. Students were exposed to the geometric structural form-finding method of polyhedral graphic statics and the concrete printing slicing and optimization framework. Through the Polyhedral Structures Laboratory-developed software PolyFrame 2 and Ovenbird, students were able to design innovative structures for cross-scale printing. Many thanks to my Teaching Assistant @mahdiyar.esmailbeigi , @ali_nv for the invitation, and @gegardner for the coordination.
Workshop results: https://psl.design.upenn.edu/taylor-workshop-at-the-university-of-calgary2026/

#concrete #concreteprinting #3dprinting #ucalgary

I was fortunate to have the opportunity of teaching a workshop focusing on 3D printing and graphic statics at the University of Calgary's School of Architecture, Planning and Landscape (SAPL) this month. The 5-day workshop, part of SAPL’s Block Week, is titled Design and Optimization for Architectural 3D Concrete Printing. Students were exposed to the geometric structural form-finding method of polyhedral graphic statics and the concrete printing slicing and optimization framework. Through the Polyhedral Structures Laboratory-developed software PolyFrame 2 and Ovenbird, students were able to design innovative structures for cross-scale printing. Many thanks to my Teaching Assistant @mahdiyar.esmailbeigi , @ali_nv for the invitation, and @gegardner for the coordination.
Workshop results: https://psl.design.upenn.edu/taylor-workshop-at-the-university-of-calgary2026/

#concrete #concreteprinting #3dprinting #ucalgary

I was fortunate to have the opportunity of teaching a workshop focusing on 3D printing and graphic statics at the University of Calgary's School of Architecture, Planning and Landscape (SAPL) this month. The 5-day workshop, part of SAPL’s Block Week, is titled Design and Optimization for Architectural 3D Concrete Printing. Students were exposed to the geometric structural form-finding method of polyhedral graphic statics and the concrete printing slicing and optimization framework. Through the Polyhedral Structures Laboratory-developed software PolyFrame 2 and Ovenbird, students were able to design innovative structures for cross-scale printing. Many thanks to my Teaching Assistant @mahdiyar.esmailbeigi , @ali_nv for the invitation, and @gegardner for the coordination.
Workshop results: https://psl.design.upenn.edu/taylor-workshop-at-the-university-of-calgary2026/

#concrete #concreteprinting #3dprinting #ucalgary

Closing out 2025 with the opening of our multifunctional, dual-banded post-tensioned, 3D-printed, carbon-absorbing modular concrete floor structure! Excited to continue building.

Closing out 2025 with the opening of our multifunctional, dual-banded post-tensioned, 3D-printed, carbon-absorbing modular concrete floor structure! Excited to continue building.

Closing out 2025 with the opening of our multifunctional, dual-banded post-tensioned, 3D-printed, carbon-absorbing modular concrete floor structure! Excited to continue building.

Closing out 2025 with the opening of our multifunctional, dual-banded post-tensioned, 3D-printed, carbon-absorbing modular concrete floor structure! Excited to continue building.

Closing out 2025 with the opening of our multifunctional, dual-banded post-tensioned, 3D-printed, carbon-absorbing modular concrete floor structure! Excited to continue building.

Closing out 2025 with the opening of our multifunctional, dual-banded post-tensioned, 3D-printed, carbon-absorbing modular concrete floor structure! Excited to continue building.