Instagram Story Viewer

That worked better than expected.
PLA 100% infill.
10x15mm LED channel

That worked better than expected.
PLA 100% infill.
10x15mm LED channel

That worked better than expected.
PLA 100% infill.
10x15mm LED channel

1) universal or noname guns are way cheaper then the 3M stuff.
2) just received new mixing tips and love how small they are - way less glue wasted compared to the (biggest) original ones. Tips are just the cheapest Bezos I found. Can‘t remember were I bought the gun but can recommend Aliexpress for the not 3M branded grey guns. #glue #3M #scotchweld #adhesive #shoptip

New worklights in the lathe. Angling the small front light made the highlight/reflections way bigger and nicer to look at. Less bright in the brightest spot / less contrast = easier on the eyes. Glad I played with the position a bit before I permanently mounted it.

New worklights in the lathe. Angling the small front light made the highlight/reflections way bigger and nicer to look at. Less bright in the brightest spot / less contrast = easier on the eyes. Glad I played with the position a bit before I permanently mounted it.

60+10 🤘
#fabrication #hack #bandsaw

60+10 🤘
#fabrication #hack #bandsaw

Speaking of additional hands… very simple mod to a #kanttwistclamp: off the shelf M4 round nut had 8mm OD. Clamp is threaded, to prevent the attachment point from twisting. Probably not necessary but cant hurt.

Speaking of additional hands… very simple mod to a #kanttwistclamp: off the shelf M4 round nut had 8mm OD. Clamp is threaded, to prevent the attachment point from twisting. Probably not necessary but cant hurt.

Speaking of additional hands… very simple mod to a #kanttwistclamp: off the shelf M4 round nut had 8mm OD. Clamp is threaded, to prevent the attachment point from twisting. Probably not necessary but cant hurt.

3rd and 4th hand. 99% of the time @omnifixo is sufficient. Sometimes a collet block & vice adds the needed gravity to finish up a connector.
#electronics #wiring #troubleshooting #arduino #make #soldering #tip #hack

Had some leftover HDPE sheets… made some #multifix drawer inserts… only one drawer deep enough to store them vertically. Lets see how I like it. #shopimprovements #lathe #instamachinist

Mut kann man nicht kaufen. (English: You can’t buy courage) but Reca sells some good taps 👍 M3. Alu.
This is not a howto. But I have to say I can not recall when was the last time that I broke a tap. At least not with the tapping arm 💪

Was just talking to @vice_chief about welding tables. Well I sometimes use mine for welding too, but 90% of the time its use is to orient all sorts of things in space temporarily and precisely.
Racoon stuff with @alexandrafruhstorfer for instance 😆
Thanks @clemenswolf for the “laser” 😘

Was just talking to @vice_chief about welding tables. Well I sometimes use mine for welding too, but 90% of the time its use is to orient all sorts of things in space temporarily and precisely.
Racoon stuff with @alexandrafruhstorfer for instance 😆
Thanks @clemenswolf for the “laser” 😘

Barrel nuts + 123 blocks. Made some custom ones (the black bits) to attach some not so precise stuff (3d printed fixture thingie) to some precise stuff (123 block) so I can clamp it in a vice and index it (relative) precisely.
Why do these small „half hour jobs“ always take almost half a day? (Making these 4 sticks with a few holes)

#prototyping #fixturing #3dprinting #machining #instamachinist #borrowingatollerance

Barrel nuts + 123 blocks. Made some custom ones (the black bits) to attach some not so precise stuff (3d printed fixture thingie) to some precise stuff (123 block) so I can clamp it in a vice and index it (relative) precisely.
Why do these small „half hour jobs“ always take almost half a day? (Making these 4 sticks with a few holes)

#prototyping #fixturing #3dprinting #machining #instamachinist #borrowingatollerance

Barrel nuts + 123 blocks. Made some custom ones (the black bits) to attach some not so precise stuff (3d printed fixture thingie) to some precise stuff (123 block) so I can clamp it in a vice and index it (relative) precisely.
Why do these small „half hour jobs“ always take almost half a day? (Making these 4 sticks with a few holes)

#prototyping #fixturing #3dprinting #machining #instamachinist #borrowingatollerance

compound angle fixturing for some trophies a friend is making -> @madaguitars
Dimensions were not super critical, just surface finish (scotchbrite pad did the rest)

compound angle fixturing for some trophies a friend is making -> @madaguitars
Dimensions were not super critical, just surface finish (scotchbrite pad did the rest)

compound angle fixturing for some trophies a friend is making -> @madaguitars
Dimensions were not super critical, just surface finish (scotchbrite pad did the rest)

compound angle fixturing for some trophies a friend is making -> @madaguitars
Dimensions were not super critical, just surface finish (scotchbrite pad did the rest)

compound angle fixturing for some trophies a friend is making -> @madaguitars
Dimensions were not super critical, just surface finish (scotchbrite pad did the rest)

compound angle fixturing for some trophies a friend is making -> @madaguitars
Dimensions were not super critical, just surface finish (scotchbrite pad did the rest)

compound angle fixturing for some trophies a friend is making -> @madaguitars
Dimensions were not super critical, just surface finish (scotchbrite pad did the rest)

compound angle fixturing for some trophies a friend is making -> @madaguitars
Dimensions were not super critical, just surface finish (scotchbrite pad did the rest)

compound angle fixturing for some trophies a friend is making -> @madaguitars
Dimensions were not super critical, just surface finish (scotchbrite pad did the rest)