Instagram Story Viewer

The light weight and purpose built aesthetic is equally at home both in serious race cars as well as the first mod to get your engine bay show ready. They have an innovative shape that allows them to work with most OEM and aftermarket batteries.

The tie downs come in Red, Blue and Black to coordinate with any engine bay color scheme.

This bracket is designed to fit Group 35 sized batteries as found on most Subarus since 1993. If you are using an aftermarket battery please take a look at the top of the battery to verify that this bracket will fit. While our design will fit a lot of batteries we cannot account for the shape of every brand of battery out there.

#ibuildracecars #subie #subaru #enginebay

🚀 3…2….1…. #ibuildracecars via @brax.sti Playing around my with my pops on the way home

#subarusti #kornfed #dragracing #insta360 subienation

Monday drive 🤌 #ibuildracecars on board with @nikko9_wrx Last One, Fast One! Despite the rain today, had a great day at NE SVT #3. 4th overall raw, 8th overall pax.

PAX 57.895 / RAW 67.242

#ibuildracecars fuel pressure sensor kit is designed to provide a way to data log and monitor fuel pressure on most new Subaru Vehicles. We chose the highest quality sensor that reads from 0 to 100PSI with a nominal voltage output of 0.5 to 4.5 Volts. This kit is compatible with all tuning systems out on the market.

Since the cars only have two TGV plugs capable of receiving inputs you cannot run our Secondary Injection Controller, Flex Fuel Sensor and Fuel Pressure Sensor kits all at the same time. You can only run a maximum of two of these three items. The SIC can be wired as power only in order to utilize all three but a custom harness must be made.

Compatibility:

3 Pin Version

2002-2005 WRX

2004-2006 STi

2004-2008 Forester XT

2005-2006 Legacy GT

2005-2006 Outback XT

5 Pin Version

2007-2021 STi

2008-2021 WRX

2007-2012 Legacy GT

2007-2009 Outback XT

2009-20013 Forester XT

Included in the kit:

Honeywell OEM Quality 100PSI Fuel Pressure Sensor
Billet Aluminum 5/16 Fuel Line Adapter
Loctite 545 Sealant Tube
Custom Designed Wiring Harness

#subaru #subie #subielove #wrx sti

Super clean setup! 🤯 #ibuildracecars via @lasvegascarspotting This Subaru WRX 😳
•
•
•
• Follow For More Car Content!
•
#car #cars #lasvegascarspotting #subaru wrx

Allllll of the sounds 🔊 #ibuildracecars via @geo.comen I just be doing shi idk#subaruwrxsti #30psi #stillslow slow

This kit is designed to be the best AOS on the market. It is a triple pass system with carefully designed diameters and cross sections to effectively remove a range of oil droplet sizes. This AOS installs directly above the main crank case vent between the intake manifold and the TMIC. Installing here allows a clean look and the shortest possible hose routing. Since this is a true AOS the oil drains back into the block and never needs to be emptied. Small ridges on the faces of the spiral baffles collect the oil and allows the oil to stay out of the laminar airflow and effectively drain down to base of the system. The internals can be cleaned periodically by disassembling the unit with the tool-free thumb screw on top.

🔗 https://www.ibuildracecars.com/store/aos01

Compatibility:

Drive by Wire:
2004 - 2021 STi
2006 - 2007 WRX (2008 - 2014 WRX can work if updated to the STi intake manifold)
2004 - 2008 Forester XT

Drive by Cable:
2002 - 2004 WRX

Works with a lot of of other vehicles with EJ20/25 engine swaps that utilize the OEM STi or WRX aluminum intake manifolds.

Key Benefits:

Never needs to be emptied

Short hose routings for a very clean install

Carbon fiber outer housing tube for a high performance look and feel

Retains factory PCV functionality

Triple pass system for the most effective droplet separation

Tool free and easy to clean assembly

Included in the kit:

AOS01 Assembly
AOS01 Mounting Bracket
All Required Hoses and Hose Clamps

NOTE: Fits all EJ based engines with the metal STi/WRX intake manifold

#ibuildracecars #subie #subaru #sti #wrx ej subielove wrxsti

Competition is healthy 😈 #ibuildracecars via @blackbbryan Which one would yall pick? 👀

Evo : @itshcb_

#fyp #vbwrx #evox

Nothing better than a clean run down a great road 🤌 #ibuildracecars via lightnin.vb Using her as intended.
______________________________________________________
@street.vision.society
@svs.slo
@perrin_performance
@importimageracing
@strafedesign
@10elevenco
______________________________________________________
#subaru #subie #wrx #vbwrx scootin

15-21 WRX/STI AccessPort vent mount. High quality vent mount that uses all the same factory vent mounting locations and retains proper ducting.

🔗 https://www.ibuildracecars.com/store/2015-21-wrxsti-accessport-vent-mount

#ibuildracecars #wrx #sti #subie #accessport

Legendary sound… not sure what could be better!?🤤🤤🤤 #ibuildracecars via @bluue.gc Uooowwww!! 🤘🏻🤘🏻🤘🏻🤘🏻
@_oficina_nascar
@escapsolutions
@motortune_performance
@octtane_oficial
#subaru #boxer #exhaust #jdm djimic2

Insane combo 😤😤 #ibuildracecars via @kaikaneshiro Just two subarus in the middle of the Pacific Ocean

#subie #subaru #subielove