Instagram Story Viewer

@shreding_aroundset in his wagon this week for full 3.5” exhaust. Twin aes cutouts. Parachute and towbar setup. @gjdrivelines3.5” pro series tailshaft, And some barwork for trans cooler mount.Can’t wait to see this thing running with the stack injection👌

@shreding_aroundset in his wagon this week for full 3.5” exhaust. Twin aes cutouts. Parachute and towbar setup. @gjdrivelines3.5” pro series tailshaft, And some barwork for trans cooler mount.Can’t wait to see this thing running with the stack injection👌

@shreding_aroundset in his wagon this week for full 3.5” exhaust. Twin aes cutouts. Parachute and towbar setup. @gjdrivelines3.5” pro series tailshaft, And some barwork for trans cooler mount.Can’t wait to see this thing running with the stack injection👌

@shreding_aroundset in his wagon this week for full 3.5” exhaust. Twin aes cutouts. Parachute and towbar setup. @gjdrivelines3.5” pro series tailshaft, And some barwork for trans cooler mount.Can’t wait to see this thing running with the stack injection👌

Old school vs new school 😤🔥

We stopped past Hell Bent Fabrication and Kane had his wild Holden HR sitting next to our white VF GTS… two very different weapons, same serious attitude.

179 with a 471 blower and flames out the side exhaust with the 2 step… this thing is absolutely unhinged 💨

Which one are you taking home?

Old school HR or new school VF 👀👇

#TuffStreeters #HellBentFabrication #HoldenHR #VFGTS #oldschoolvsnewschool

@callum_stanforth_13Sent in his tuff as Fark vh for a bolt in cage and mounts some kirkey.I was a bit unsure when he asked for it to painted body colour but it turned out mint👌

@callum_stanforth_13Sent in his tuff as Fark vh for a bolt in cage and mounts some kirkey.I was a bit unsure when he asked for it to painted body colour but it turned out mint👌

@callum_stanforth_13Sent in his tuff as Fark vh for a bolt in cage and mounts some kirkey.I was a bit unsure when he asked for it to painted body colour but it turned out mint👌

@callum_stanforth_13Sent in his tuff as Fark vh for a bolt in cage and mounts some kirkey.I was a bit unsure when he asked for it to painted body colour but it turned out mint👌

@callum_stanforth_13Sent in his tuff as Fark vh for a bolt in cage and mounts some kirkey.I was a bit unsure when he asked for it to painted body colour but it turned out mint👌

@callum_stanforth_13Sent in his tuff as Fark vh for a bolt in cage and mounts some kirkey.I was a bit unsure when he asked for it to painted body colour but it turned out mint👌

@callum_stanforth_13Sent in his tuff as Fark vh for a bolt in cage and mounts some kirkey.I was a bit unsure when he asked for it to painted body colour but it turned out mint👌

Dan sent in his killa patina hr and gave us the job of sorting out the rear end.
We got rid of all the rusty bits and replaced it withfresh bits and with it now rolling on 10” rim and 275/60’s it come up a treat👌. While it was there we supplied a complete 9 inch with all the fruit.Can’t wait to see this thing roaming the streets

Dan sent in his killa patina hr and gave us the job of sorting out the rear end.
We got rid of all the rusty bits and replaced it withfresh bits and with it now rolling on 10” rim and 275/60’s it come up a treat👌. While it was there we supplied a complete 9 inch with all the fruit.Can’t wait to see this thing roaming the streets

Dan sent in his killa patina hr and gave us the job of sorting out the rear end.
We got rid of all the rusty bits and replaced it withfresh bits and with it now rolling on 10” rim and 275/60’s it come up a treat👌. While it was there we supplied a complete 9 inch with all the fruit.Can’t wait to see this thing roaming the streets

Dan sent in his killa patina hr and gave us the job of sorting out the rear end.
We got rid of all the rusty bits and replaced it withfresh bits and with it now rolling on 10” rim and 275/60’s it come up a treat👌. While it was there we supplied a complete 9 inch with all the fruit.Can’t wait to see this thing roaming the streets

Dan sent in his killa patina hr and gave us the job of sorting out the rear end.
We got rid of all the rusty bits and replaced it withfresh bits and with it now rolling on 10” rim and 275/60’s it come up a treat👌. While it was there we supplied a complete 9 inch with all the fruit.Can’t wait to see this thing roaming the streets

Dan sent in his killa patina hr and gave us the job of sorting out the rear end.
We got rid of all the rusty bits and replaced it withfresh bits and with it now rolling on 10” rim and 275/60’s it come up a treat👌. While it was there we supplied a complete 9 inch with all the fruit.Can’t wait to see this thing roaming the streets

Dan sent in his killa patina hr and gave us the job of sorting out the rear end.
We got rid of all the rusty bits and replaced it withfresh bits and with it now rolling on 10” rim and 275/60’s it come up a treat👌. While it was there we supplied a complete 9 inch with all the fruit.Can’t wait to see this thing roaming the streets

Dan sent in his killa patina hr and gave us the job of sorting out the rear end.
We got rid of all the rusty bits and replaced it withfresh bits and with it now rolling on 10” rim and 275/60’s it come up a treat👌. While it was there we supplied a complete 9 inch with all the fruit.Can’t wait to see this thing roaming the streets

My old mans business got robbed this morning at 4 am. .He stole a brand new demo saw. Cash reward for any info. Reach out to me, Rick or Brent. @baycity_rentals

Another cool little air bag tank we knocked up for the boys at @elitebikes22 .#breakout #bagged

Another cool little air bag tank we knocked up for the boys at @elitebikes22 .#breakout #bagged

Another cool little air bag tank we knocked up for the boys at @elitebikes22 .#breakout #bagged

@steven_loader_motorsport dropped off this beautiful original GTS on Tue morning and she is all ready to pick up tommorrow👌.
🏁split tubbed to the rail.
🏁reset leafs
🏁weld alumastars 8”3bs
🏁psr255/60 radials
🏁 9”housing and 31spline billet axles
🏁3.9 centre with all the good bits.
🏁raised tunnel.
🏁 Pedders shocks
🏁 some of our saddle plates and new u bolts.
#gtsmonaro #weldwheels @speedpro_aus

@steven_loader_motorsport dropped off this beautiful original GTS on Tue morning and she is all ready to pick up tommorrow👌.
🏁split tubbed to the rail.
🏁reset leafs
🏁weld alumastars 8”3bs
🏁psr255/60 radials
🏁 9”housing and 31spline billet axles
🏁3.9 centre with all the good bits.
🏁raised tunnel.
🏁 Pedders shocks
🏁 some of our saddle plates and new u bolts.
#gtsmonaro #weldwheels @speedpro_aus

@steven_loader_motorsport dropped off this beautiful original GTS on Tue morning and she is all ready to pick up tommorrow👌.
🏁split tubbed to the rail.
🏁reset leafs
🏁weld alumastars 8”3bs
🏁psr255/60 radials
🏁 9”housing and 31spline billet axles
🏁3.9 centre with all the good bits.
🏁raised tunnel.
🏁 Pedders shocks
🏁 some of our saddle plates and new u bolts.
#gtsmonaro #weldwheels @speedpro_aus

@steven_loader_motorsport dropped off this beautiful original GTS on Tue morning and she is all ready to pick up tommorrow👌.
🏁split tubbed to the rail.
🏁reset leafs
🏁weld alumastars 8”3bs
🏁psr255/60 radials
🏁 9”housing and 31spline billet axles
🏁3.9 centre with all the good bits.
🏁raised tunnel.
🏁 Pedders shocks
🏁 some of our saddle plates and new u bolts.
#gtsmonaro #weldwheels @speedpro_aus

@steven_loader_motorsport dropped off this beautiful original GTS on Tue morning and she is all ready to pick up tommorrow👌.
🏁split tubbed to the rail.
🏁reset leafs
🏁weld alumastars 8”3bs
🏁psr255/60 radials
🏁 9”housing and 31spline billet axles
🏁3.9 centre with all the good bits.
🏁raised tunnel.
🏁 Pedders shocks
🏁 some of our saddle plates and new u bolts.
#gtsmonaro #weldwheels @speedpro_aus

@steven_loader_motorsport dropped off this beautiful original GTS on Tue morning and she is all ready to pick up tommorrow👌.
🏁split tubbed to the rail.
🏁reset leafs
🏁weld alumastars 8”3bs
🏁psr255/60 radials
🏁 9”housing and 31spline billet axles
🏁3.9 centre with all the good bits.
🏁raised tunnel.
🏁 Pedders shocks
🏁 some of our saddle plates and new u bolts.
#gtsmonaro #weldwheels @speedpro_aus

@steven_loader_motorsport dropped off this beautiful original GTS on Tue morning and she is all ready to pick up tommorrow👌.
🏁split tubbed to the rail.
🏁reset leafs
🏁weld alumastars 8”3bs
🏁psr255/60 radials
🏁 9”housing and 31spline billet axles
🏁3.9 centre with all the good bits.
🏁raised tunnel.
🏁 Pedders shocks
🏁 some of our saddle plates and new u bolts.
#gtsmonaro #weldwheels @speedpro_aus

@steven_loader_motorsport dropped off this beautiful original GTS on Tue morning and she is all ready to pick up tommorrow👌.
🏁split tubbed to the rail.
🏁reset leafs
🏁weld alumastars 8”3bs
🏁psr255/60 radials
🏁 9”housing and 31spline billet axles
🏁3.9 centre with all the good bits.
🏁raised tunnel.
🏁 Pedders shocks
🏁 some of our saddle plates and new u bolts.
#gtsmonaro #weldwheels @speedpro_aus

@steven_loader_motorsport dropped off this beautiful original GTS on Tue morning and she is all ready to pick up tommorrow👌.
🏁split tubbed to the rail.
🏁reset leafs
🏁weld alumastars 8”3bs
🏁psr255/60 radials
🏁 9”housing and 31spline billet axles
🏁3.9 centre with all the good bits.
🏁raised tunnel.
🏁 Pedders shocks
🏁 some of our saddle plates and new u bolts.
#gtsmonaro #weldwheels @speedpro_aus

@steven_loader_motorsport dropped off this beautiful original GTS on Tue morning and she is all ready to pick up tommorrow👌.
🏁split tubbed to the rail.
🏁reset leafs
🏁weld alumastars 8”3bs
🏁psr255/60 radials
🏁 9”housing and 31spline billet axles
🏁3.9 centre with all the good bits.
🏁raised tunnel.
🏁 Pedders shocks
🏁 some of our saddle plates and new u bolts.
#gtsmonaro #weldwheels @speedpro_aus

@steven_loader_motorsport dropped off this beautiful original GTS on Tue morning and she is all ready to pick up tommorrow👌.
🏁split tubbed to the rail.
🏁reset leafs
🏁weld alumastars 8”3bs
🏁psr255/60 radials
🏁 9”housing and 31spline billet axles
🏁3.9 centre with all the good bits.
🏁raised tunnel.
🏁 Pedders shocks
🏁 some of our saddle plates and new u bolts.
#gtsmonaro #weldwheels @speedpro_aus

@steven_loader_motorsport dropped off this beautiful original GTS on Tue morning and she is all ready to pick up tommorrow👌.
🏁split tubbed to the rail.
🏁reset leafs
🏁weld alumastars 8”3bs
🏁psr255/60 radials
🏁 9”housing and 31spline billet axles
🏁3.9 centre with all the good bits.
🏁raised tunnel.
🏁 Pedders shocks
🏁 some of our saddle plates and new u bolts.
#gtsmonaro #weldwheels @speedpro_aus

@steven_loader_motorsport dropped off this beautiful original GTS on Tue morning and she is all ready to pick up tommorrow👌.
🏁split tubbed to the rail.
🏁reset leafs
🏁weld alumastars 8”3bs
🏁psr255/60 radials
🏁 9”housing and 31spline billet axles
🏁3.9 centre with all the good bits.
🏁raised tunnel.
🏁 Pedders shocks
🏁 some of our saddle plates and new u bolts.
#gtsmonaro #weldwheels @speedpro_aus

@steven_loader_motorsport dropped off this beautiful original GTS on Tue morning and she is all ready to pick up tommorrow👌.
🏁split tubbed to the rail.
🏁reset leafs
🏁weld alumastars 8”3bs
🏁psr255/60 radials
🏁 9”housing and 31spline billet axles
🏁3.9 centre with all the good bits.
🏁raised tunnel.
🏁 Pedders shocks
🏁 some of our saddle plates and new u bolts.
#gtsmonaro #weldwheels @speedpro_aus

@steven_loader_motorsport dropped off this beautiful original GTS on Tue morning and she is all ready to pick up tommorrow👌.
🏁split tubbed to the rail.
🏁reset leafs
🏁weld alumastars 8”3bs
🏁psr255/60 radials
🏁 9”housing and 31spline billet axles
🏁3.9 centre with all the good bits.
🏁raised tunnel.
🏁 Pedders shocks
🏁 some of our saddle plates and new u bolts.
#gtsmonaro #weldwheels @speedpro_aus

We had @paul.a.douglas1 ‘s twin turbo sbf corty in for preparation for tech.We setup parachute and towbar setup for S&m, belly pan and mounted harness’s. This will be a pretty sweet Hotrod once it hits the track👌

We had @paul.a.douglas1 ‘s twin turbo sbf corty in for preparation for tech.We setup parachute and towbar setup for S&m, belly pan and mounted harness’s. This will be a pretty sweet Hotrod once it hits the track👌

We had @paul.a.douglas1 ‘s twin turbo sbf corty in for preparation for tech.We setup parachute and towbar setup for S&m, belly pan and mounted harness’s. This will be a pretty sweet Hotrod once it hits the track👌

We had @paul.a.douglas1 ‘s twin turbo sbf corty in for preparation for tech.We setup parachute and towbar setup for S&m, belly pan and mounted harness’s. This will be a pretty sweet Hotrod once it hits the track👌

We had @paul.a.douglas1 ‘s twin turbo sbf corty in for preparation for tech.We setup parachute and towbar setup for S&m, belly pan and mounted harness’s. This will be a pretty sweet Hotrod once it hits the track👌

We had @paul.a.douglas1 ‘s twin turbo sbf corty in for preparation for tech.We setup parachute and towbar setup for S&m, belly pan and mounted harness’s. This will be a pretty sweet Hotrod once it hits the track👌

We had @paul.a.douglas1 ‘s twin turbo sbf corty in for preparation for tech.We setup parachute and towbar setup for S&m, belly pan and mounted harness’s. This will be a pretty sweet Hotrod once it hits the track👌

We had @paul.a.douglas1 ‘s twin turbo sbf corty in for preparation for tech.We setup parachute and towbar setup for S&m, belly pan and mounted harness’s. This will be a pretty sweet Hotrod once it hits the track👌

We had @paul.a.douglas1 ‘s twin turbo sbf corty in for preparation for tech.We setup parachute and towbar setup for S&m, belly pan and mounted harness’s. This will be a pretty sweet Hotrod once it hits the track👌

8 SPEED SWAPS
Universal Rear Support Bracket Kit
To Suit Both BMW ZF8HP70 8 Speed RWD Transmissions From The BMW N57 6 Cylinder Diesel And The BMW N63 V8 Twin Turbo Engines.
Includes GM Turbo 400 Mount & All Hobson class 9/12 Fasteners. $275 plus postage available to purchase on EBAY link below.
https://ebay.us/m/Zlgtar
#zf8hp #8speed #8hp70swap #zf8speed #MadeinAustralia

8 SPEED SWAPS
Universal Rear Support Bracket Kit
To Suit Both BMW ZF8HP70 8 Speed RWD Transmissions From The BMW N57 6 Cylinder Diesel And The BMW N63 V8 Twin Turbo Engines.
Includes GM Turbo 400 Mount & All Hobson class 9/12 Fasteners. $275 plus postage available to purchase on EBAY link below.
https://ebay.us/m/Zlgtar
#zf8hp #8speed #8hp70swap #zf8speed #MadeinAustralia

8 SPEED SWAPS
Universal Rear Support Bracket Kit
To Suit Both BMW ZF8HP70 8 Speed RWD Transmissions From The BMW N57 6 Cylinder Diesel And The BMW N63 V8 Twin Turbo Engines.
Includes GM Turbo 400 Mount & All Hobson class 9/12 Fasteners. $275 plus postage available to purchase on EBAY link below.
https://ebay.us/m/Zlgtar
#zf8hp #8speed #8hp70swap #zf8speed #MadeinAustralia

8 SPEED SWAPS
Universal Rear Support Bracket Kit
To Suit Both BMW ZF8HP70 8 Speed RWD Transmissions From The BMW N57 6 Cylinder Diesel And The BMW N63 V8 Twin Turbo Engines.
Includes GM Turbo 400 Mount & All Hobson class 9/12 Fasteners. $275 plus postage available to purchase on EBAY link below.
https://ebay.us/m/Zlgtar
#zf8hp #8speed #8hp70swap #zf8speed #MadeinAustralia

8 SPEED SWAPS
Universal Rear Support Bracket Kit
To Suit Both BMW ZF8HP70 8 Speed RWD Transmissions From The BMW N57 6 Cylinder Diesel And The BMW N63 V8 Twin Turbo Engines.
Includes GM Turbo 400 Mount & All Hobson class 9/12 Fasteners. $275 plus postage available to purchase on EBAY link below.
https://ebay.us/m/Zlgtar
#zf8hp #8speed #8hp70swap #zf8speed #MadeinAustralia

8 SPEED SWAPS
Universal Rear Support Bracket Kit
To Suit Both BMW ZF8HP70 8 Speed RWD Transmissions From The BMW N57 6 Cylinder Diesel And The BMW N63 V8 Twin Turbo Engines.
Includes GM Turbo 400 Mount & All Hobson class 9/12 Fasteners. $275 plus postage available to purchase on EBAY link below.
https://ebay.us/m/Zlgtar
#zf8hp #8speed #8hp70swap #zf8speed #MadeinAustralia

8 SPEED SWAPS
Universal Rear Support Bracket Kit
To Suit Both BMW ZF8HP70 8 Speed RWD Transmissions From The BMW N57 6 Cylinder Diesel And The BMW N63 V8 Twin Turbo Engines.
Includes GM Turbo 400 Mount & All Hobson class 9/12 Fasteners. $275 plus postage available to purchase on EBAY link below.
https://ebay.us/m/Zlgtar
#zf8hp #8speed #8hp70swap #zf8speed #MadeinAustralia

Time flys when ya having fun! Every bit about Hellbent I love, some days I want to tip the joint upside down and pull the pin but then the next day I’m back working even harder. I’ve learnt so much here and love that I’m still learning and bettering mine and the boys skills everyday. I’ll forever be grateful for the love and support I get from all of our customers and suppliers Australia wide.

The way HDT should have built them😍. We had this genuine ss in last week for complete new setup in preparation for the new nitro’s engine combo.
🤟🏻round shoulder mini tubbed.
🤟🏻 full boot floor.
🤟🏻 @gazzardbrothersanti roll bar.
🤟🏻chromoly control arms
🤟🏻 @racestrange double adjustable coilovers.
🤟🏻 9”housing and 35spline billets.

The way HDT should have built them😍. We had this genuine ss in last week for complete new setup in preparation for the new nitro’s engine combo.
🤟🏻round shoulder mini tubbed.
🤟🏻 full boot floor.
🤟🏻 @gazzardbrothersanti roll bar.
🤟🏻chromoly control arms
🤟🏻 @racestrange double adjustable coilovers.
🤟🏻 9”housing and 35spline billets.

The way HDT should have built them😍. We had this genuine ss in last week for complete new setup in preparation for the new nitro’s engine combo.
🤟🏻round shoulder mini tubbed.
🤟🏻 full boot floor.
🤟🏻 @gazzardbrothersanti roll bar.
🤟🏻chromoly control arms
🤟🏻 @racestrange double adjustable coilovers.
🤟🏻 9”housing and 35spline billets.

The way HDT should have built them😍. We had this genuine ss in last week for complete new setup in preparation for the new nitro’s engine combo.
🤟🏻round shoulder mini tubbed.
🤟🏻 full boot floor.
🤟🏻 @gazzardbrothersanti roll bar.
🤟🏻chromoly control arms
🤟🏻 @racestrange double adjustable coilovers.
🤟🏻 9”housing and 35spline billets.

The way HDT should have built them😍. We had this genuine ss in last week for complete new setup in preparation for the new nitro’s engine combo.
🤟🏻round shoulder mini tubbed.
🤟🏻 full boot floor.
🤟🏻 @gazzardbrothersanti roll bar.
🤟🏻chromoly control arms
🤟🏻 @racestrange double adjustable coilovers.
🤟🏻 9”housing and 35spline billets.

The way HDT should have built them😍. We had this genuine ss in last week for complete new setup in preparation for the new nitro’s engine combo.
🤟🏻round shoulder mini tubbed.
🤟🏻 full boot floor.
🤟🏻 @gazzardbrothersanti roll bar.
🤟🏻chromoly control arms
🤟🏻 @racestrange double adjustable coilovers.
🤟🏻 9”housing and 35spline billets.

The way HDT should have built them😍. We had this genuine ss in last week for complete new setup in preparation for the new nitro’s engine combo.
🤟🏻round shoulder mini tubbed.
🤟🏻 full boot floor.
🤟🏻 @gazzardbrothersanti roll bar.
🤟🏻chromoly control arms
🤟🏻 @racestrange double adjustable coilovers.
🤟🏻 9”housing and 35spline billets.

A few more set of commodore control arms ready to ship today👌 2 sets of Vl lower arms and a set for a vs Ute with adjustable diff brackets.

A few more set of commodore control arms ready to ship today👌 2 sets of Vl lower arms and a set for a vs Ute with adjustable diff brackets.