Instagram Story Viewer

Making my ultra lightweight ballistic helmet heavier for fun (and why). Also Railink.

Components list:
@_opscore SF Gen 2 + full Railink and AMP suites
@odgusa x @tracertactical Hybrid Helmet Cover
@pteclights Switch
@surefire_llc HL2-A
@koffinwurks KRAMPS downlead management
@nocturnindustries Alpha Mount
@nfqofficial Drip
@microbatsystems Flathead full-size counterweight

𝙁𝙪𝙣𝙣𝙮 𝙃𝙖𝙩 𝙈𝙖𝙭𝙭𝙞𝙣𝙜

Components list:
@_opscore SF Gen2 with RAILINK and AMP systems
@odgusa x @tracertactical Hybrid helmet cover
@surefire_llc HL2-A
@pteclights Switch Railink
@nocturnindustries Chimera and Alpha Mount
@microbatsystems Flathead Full-size counterweight
@koffinwurks KRAMPS downlead management

𝙁𝙪𝙣𝙣𝙮 𝙃𝙖𝙩 𝙈𝙖𝙭𝙭𝙞𝙣𝙜

Components list:
@_opscore SF Gen2 with RAILINK and AMP systems
@odgusa x @tracertactical Hybrid helmet cover
@surefire_llc HL2-A
@pteclights Switch Railink
@nocturnindustries Chimera and Alpha Mount
@microbatsystems Flathead Full-size counterweight
@koffinwurks KRAMPS downlead management

𝙁𝙪𝙣𝙣𝙮 𝙃𝙖𝙩 𝙈𝙖𝙭𝙭𝙞𝙣𝙜

Components list:
@_opscore SF Gen2 with RAILINK and AMP systems
@odgusa x @tracertactical Hybrid helmet cover
@surefire_llc HL2-A
@pteclights Switch Railink
@nocturnindustries Chimera and Alpha Mount
@microbatsystems Flathead Full-size counterweight
@koffinwurks KRAMPS downlead management

𝙁𝙪𝙣𝙣𝙮 𝙃𝙖𝙩 𝙈𝙖𝙭𝙭𝙞𝙣𝙜

Components list:
@_opscore SF Gen2 with RAILINK and AMP systems
@odgusa x @tracertactical Hybrid helmet cover
@surefire_llc HL2-A
@pteclights Switch Railink
@nocturnindustries Chimera and Alpha Mount
@microbatsystems Flathead Full-size counterweight
@koffinwurks KRAMPS downlead management

Spending some time with the latest from Princeton Tec. The new Ghost X, a super dope little headlamp. Multiple outputs in both visible and IR spectrums. “Ghost mode” activated by the throw lever immediately kills and locks out visible light settings to prevent white light ND. Easily my top pick for kit admin light. I plan on primarily keeping this riding at the top of my front plate bag. Very quickly adaptable to your arc rail as well for redundancy should the need arise. While I won’t be dedicating it to helmet use (I am running railink powered solutions for that), the Ghost makes a strong contender for a powerful helmet light for under a hundred bucks. Looking at you, $500 M-Ax arm and surefire vamp setup. In my own comparisons so far, this thing can get very impressive output side by side. IR output up to 320mWr. Follow up video later comparing output of the two.

#nightvision #opscore #princetontec

HHC user in the wild. Thanks for the rad picture.

#chooseyourprey

We here at ODG are an @accuracyinternational family. Happy Monday Everyone

@wilcoxindustries @rrssoar @nightforce_optics @spuhr

#chooseyourprey

𝙏𝙧𝙖𝙘𝙚𝙧 𝙓 𝙊𝘿𝙂 𝙃𝙮𝙗𝙧𝙞𝙙 𝙃𝙚𝙡𝙢𝙚𝙩 𝘾𝙤𝙫𝙚𝙧
Confirming our suspicions that this iteration would far surpass the previous gen, I’m happy to say that Tracer quality is evident here. While the previous model was OEM’d by LBT and didn’t lack in function or durability, uneven geometry was a common issue. This version is well tailored and very much symmetrical. Quality in material is also improved and small (well thought out) changes have been made, improving upon the original design without sacrificing any of the sought after functionality or aesthetic.

I’d like to point out two things that I think will be important to confirm for certain end users:

1. Rail link compatibility is confirmed. Installing the helmet cover with rail link system removed is a must. The power bridge at the rear of the system seats over and locks down on the helmet cover just fine. You’ll need to only make minor adjustments to the grub screw retention to accommodate for the extra cover material between the helmet shell and power bridge.

2. Ops core SF gen 2 helmet shell compatibility confirmed. It’s a near perfect fit. As with all helmet covers, time and effort are required to achieve the best fit and none are completely perfect. This one comes closest. There’s been some talk about the overall size of the Gen 2 SF shell potentially being slightly larger in exterior dimension over the Gen 1. If there is a difference, it may not be on all units or it’s not easily noticeable to me holding them side by side. That being said, the new cover definitely seems to be made for this specific fit. I also found the XL to be appropriately sized for my XL helmet. Will update when my second cover comes in for my gen 1 helmet.

For those interested, helmet setup is as follows:

@_opscore
SF Gen 2
Railink
Amps

@i.infinityiris Irises
@pteclights railink admin light
@surefire_llc HL2-A light
@koffinwurks Kramps downlead retainer
@nocturnindustries Alpha Mount
Panos from South Korea

#nightvision #opscore

Get your helmets on. Shit’s about to get real.

📸 @vincewoehrle

Multicam Black Hybrid Helmet Covers headed out @odgusa

RIP - Brad Arnold of @3doorsdown

Multicam Black Hybrid Helmet Covers headed out @odgusa

RIP - Brad Arnold of @3doorsdown

Multicam Black Hybrid Helmet Covers headed out @odgusa

RIP - Brad Arnold of @3doorsdown

Multicam Black Hybrid Helmet Covers headed out @odgusa

RIP - Brad Arnold of @3doorsdown

Multicam Black Hybrid Helmet Covers headed out @odgusa

RIP - Brad Arnold of @3doorsdown

Happy Friday.

#odgusa

Crazy to think that some of these parts are now “legacy”

@unitytactical Switching
@advancedarmamentco Mini 4
@surefire_llc Vampire head

@odgusa RAD Sling (definitely not legacy)

Happy New Year Everyone

#madeinusa🇺🇸 #odgusa

First batch headed out. Thanks for your patience everyone.

@tracertactical did a phenomenal job on these.

#odgusa #madeinusa